Stainless steel 304----Stainless Steel Flat Bar
There are two methods of angle bars processing which are slit rolled edge and hot drawn. After processing procedure, the materials could be polished to different surface or gauer the slit edge with different demands to widely use the materials.
Stainless steel flat bar can be divided into two primary groups, one is true flat bar , the other is sheared and edged bar. True flat bar is usually in the hot rolled and pickled condition, though it may sometimes be cold drawn. This kind of bar has fairly sharp corners and tighter tolerances on thickness and width than sheared and edged bar, and is often used by fabricators where the finished project is polished. Sheared and edged material is cut from plate, and then put through a process which straightens the bars and cleans up the edges. This is a much cost effective way to buy a flat bar when tolerances of edge and corner sharpness are not critical.
Stainless steel flat bars are widely used for industrial tools, mechanical parts, structure and escalator for construction etc.
Executive Standards:
ASTM A276/A 276M,A 484/A 484M,A 564/A 564M,A 638/A 638M, A 705/A 705M etc
Material Grade:
201、303、304、304L、310、310S、316、316L、316F、321、410、416、420、420F、430、430F、431、630、631，2205、2207、F51 etc.
Size Range:
Hot-rolled flat bar thickness range is 20-60mm, Hot-forged flat bar width range is 20-350mm;Cold-drawn flat bar thickness range is 3-25mm, Cold-drawn flat bar width range is 19-180mm
Finish Type:
Hot-rolled、annealled、picked, Hot-forged、annealled、picked,or Cold-drawn bright surface, as per customer’s request
Stainless steel flat bar is divided into two primary groups – true flat bar and sheared and edged bar.
True flat bar is usually in the HRAP condition, though it may sometimes be cold drawn. This bar has fairly sharp corners and tighter tolerances on thickness and width than sheared and edged, and is often used by fabricators where the finished project is polished.
Sheared and edged material is cut from plate, and then put through a process which straightens the bars and cleans up the edges. This is a much more cost effective way to but flat bar when corner sharpness and tolerances aren’t critical.
For quick quotation, plz offer us following information,
Material Grade, Size (Width x Thickness x Length), Tolerance, Finish, Quantity, Delivery condition
Keywords: Stainless steel, Stainless steel 304, Stainless steel flat bar