Honed Tube----Cold Drawn Cylinder Tubes and Hard Chrome Bars
Cold Drawn Cylinder Tubes Suitable To Hone (HPZ)
Specification:EN 10305 part 1/2 (former DIN 2391/3)
Grade:E355 (St 52), other materials upon request
Delivery condition:+ SR (BK+S) cold drawn and stress-relieved
Finish: Random lengths Cut lengths
Outside diameter:30 to 200 mm
Wall thickness:5 to 20 mm
Certification:3.1 according to EN 10204, others upon request
Cold Drawn and Hot Finished Cylinder Tube with Honed or Skived- Roller Burnished Bore (HP)
Specification: Cold Drawn EN 10305-1/2 (former DIN 2391/3)
Hot Finished EN 10297-1 or EN 10210 -1
Grade: E355 or S355 (St 52), other materials on request
Delivery condition: Cold drawn stress-relieved (BK+S).
Hot finished as rolled (AR) or normalised (+ N )
Finish: Random lengths Cut lengths
Ends: Capped
Tolerances ID: H8, ISO 286 Part 2 for cold finished,
H8-H11, ISO 286 Part 2 for hot finished
Outside diameter: 25 to 280 mm for cold finished
25 to 660 mm for hot finished
Inner diameter: 20 to 600 mm
Interior finish: Roller burnished or honed
Surface Finish Ra max. 0.25 μm for cold finished
Ra max. 0.5 μm for hot finished
Certification: 3.1 according to EN 10204, others upon request
Seamless Cold Precision Steel Tubes for Piston Tube Applications (HPK)
Delivery Terms: EN 10305-1 (former DIN 2391-2)
Material: E355 (St 52), other materials on request
Delivery Status: C + (BK) cold drawn hard + SR (BK+S) cold drawn and stress-annealed
+ N (NBK) normalised
Finish: Random lengths Cut lengths
OD tolerances: TBA
ID Tolerances: TBA
Outside diameter: 35 to 140 mm
Wall thickness: 3.5 to 15 mm
Certification: 3.1 according to EN 10204, others upon request
Hard Chrome Piston Tubes (HPK)
Specification: EN 10305-1 (former DIN 2391-2)
Grade: E355 (St 52), other materials on request
Delivery Condition:´
C + (BK) cold drawn hard
+ SR (BKS) cold drawn and stress-annealed
+ N (NBK) annealed normal
Finish: Random lengths Cut lengths
Tolerances OD: f7 -ISO 286 Part 2
Outside diameter: 35 to 140 mm
Wall thickness: 3.5 to 15.0 mm
Surface: hard chrome
Chrome layer thickness: 20 μm minimum
Roughness: Ra max. 0.2 μm
Micro hardness of chromium: min. 850 HV 0,1 min. 72 h NSS R 10
Test conditions: ISO 9227
Evaluation: ISO 10289
Certification 3.1 according to EN 10204, others on request
Hard Chrome Bars for Piston Rod Applications
Grades: 20MnV6, Ck45 (C45E) AISI 329 Stainless AISI 630 Stainless Further materials upon request
Finish: Random lengths Cut lengths
Tolerances OD: 8 to 16 mm -ISO f8; 18 to 160 mm = ISO f7
Surface: Hard chrome OD / 8 to 18 mm, 14 μm min
Chrome thickness: 20 to 160 mm 20 μm min
Roughness: Ra max. 0.2 μm
Micro hardness of chromium: min. 850 HV 0,1
Corrosion resistance min. 72 h NSS rating 10.
Min 216 hours NSS rating 9
OD 18 to 120 mm
Certification: 3.1 according to EN 10204, others upon request
Typical Applications:
Hydraulic and pneumatic cylinders for mining, agricultural and farm machinery, hoists, automotive and transport lifting equipment, waste disposal transport, food processing equipment, mechanical tools and equipment, compressors and earth moving equipment etc.