News

ASTM A554 Welded Stainless Steel Mechanical Tubing

 ASTM A554 WELDED STAINLESS STEEL MECHANICAL TUBING

 
As-welded or cold-reduced mechanical tubing.
 
Shapes:
Round, Square, Rectangle, or special.
 
Dimension:
OD ≤406.4mm
WT ≥0.51mm
 
Grade:
MT-301,  MT-302, MT-304, MT-309S
MT-310S, MT-316, MT-316L, MT-317
MT-321, MT-347, MT-430, MT-430i
 
Materials and Manufacture:
The tubes are manufactured from flat-rolled steel by automatic welding process.
 
Delivery Condition:
1.  As welded
2. Welded and annealed
3. Cold reduced
4. Cold reduced and annealed
 
Inside diameter bead:
a. Bead not removed
b. Bead controlled to 0.005 in. (0.13mm) or 15% of the specified wall thickness, whichever is greater
c. Bead removed
 
Surface Finish:
Tubes surface are free of scale
 
Packing: 
In bundles with outside protection and seaworthy packing
Wooden box, crate, cartons, with a lifts on the bundles for easy loading and unloading
 
 
ASTM A554 Welded Stainless Steel Tube , Mechanical Stainless Steel Square Tubing ASTM A554 Welded Stainless Steel Tube , Mechanical Stainless Steel Square Tubing
 
SUPPLEMENTARY REQUIREMENTS:
S1  Hardness Test
S2  Tension Test
S3  Nondestructive Test
S4  Test Report
 
 
Referenced Documents:
ASTM Standards:
ASTM A370    Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E30      Test Methods for Chemical Anaysis of Steel, Cast Iron, Open-Hearth Iron 
                          and Wrought Iron
ASTM E 59        Practice for Sampling Steel and Iron for Determination of Chemical Composition
 
Military Standards:
MIL-STD-129    Marking for Shipment and Storage
MIL-STD-163    Steel Mill Products Preparation for Shipment and Storage
 
Federal Standard:
Fed. Std. No. 123   Marking for Shipments