Pure Nickel /Nickel Alloys Pipe and Tube
Nickel alloys are used for high-temperature and highly corrosive media. Such conditions are typical for power generation industry, chemical ,petrochemical industry, aerospace engineering.Advanced nickel-based high strength alloys traditionally have nickel and chromium as their foundation, with elements such as molybdenum, tungsten and cobalt added to confer additional solid solution strengthening. Where high temperature strength is critical, additions of aluminum, titanium and niobium, resulting in precipitation hardening , must be added.
Standard:
Inconel-Standard Available:ASME SB167; SB423;SB407; SB444
Monel-Standard Available:ASME SB165
Hastelloy- Standard Available:ASME SB626;SB622
Pure Nickel-Standard Available:ASME SB161;SB163
Material Grade:
Ø Inconel/Monel Nickel Alloys
ØUNS N06600/N06601
ØUNS N06625
ØUNS N08800/N08810
ØUNS N08825
ØUNS N04400
Ø Pure Nickel/Hastelloy Alloys
ØUNS N10276(C276)
ØUNS N06022(C22)
ØUNS N06455(C4)
ØUNS N02200
ØUNSN02201
Duplex and Super Duplex Pipes and Tubes
Duplex Stainless Steel have a structure that contains both ferrite and austenite. Duplex alloys have higher strength and better stress corrosion cracking resistance than most austenitic alloys and greater toughness than ferritic alloys, especially at low temperatures. The corrosion resistance of duplex alloys depends primarily on their composition, especially the amount of chromium, molybdenum, and nitrogen they contain.
Standard: ASTM/ASME A/SA789, A/SA790, A/SA928, DIN17456/17458, EN10216-5. After negotiation, we can supply pipe with customers'requirement.
Material Grade:UNS S31803,S32205,S32101,S32304,S32750,S32760,1.4462,1.4410etc.
