DOM Tubing Supplier
Drawn-over-mandrel tubing – DOM tubing is made from a cold-drawn electrical-resistance-welded tube that is drawn through a die and over a mandrel to create such characteristics as dimensional accuracy, dependable weld integrity, and an excellent surface finish. Also, this type of tubing is very cost-effective. Furthermore, the close tolerance of the tube can be used for mechanical parts with little to no downstream processing.
The Many Purposes of DOM Tubing
Drawn Over Mandrel tubing is used for a variety of applications and industries. The tubing is used for machinery, hydraulics, motorcycle frames, and bearings. Of course, these are just a few examples of what it is used for. This type of tubing creates a seamless connection, unlike a welded tube. Because of this, DOM is usually chosen over welded tube where high pressure or large workloads are needed.
Being sturdy and reliable, this tubing is often used in automotive parts, race car frames, motorcycle frames, and farming equipment. Drawn Over Mandrel tubing is available in many different sizes and specifications. The industrial tubing is used for a wide range of bushing and structural applications.
When it comes down to a DOM tubing supplier, your number one choice is Detroit Nipple Works. Also, we meet all requirements of the tubing such as ASTM Specification A513 with a high degree of wall uniformity. In addition, we have a large selection of sizes to choose from.
ASTM A 249/A 249M Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser tubes
ASTM A269/A269M, ASME SA269/SA269M Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
ASTM A 270 Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
ASTM A312/A312M, ASME SA312/SA312M Specification for Seamless and Welded Austenitic Stainless Steel Pipes
ASTM A 358/A 358M Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service
ASTM A409/SA409 Welded Large Diameter Austenitic Steel Pipe for Corrosive or High Temperature Service
ASTM B515/ASME SB515
ASTM B516, ASME SB516,
ASTM A 554 Specification for Welded Stainless Steel Mechanical Tubing
ASTM A632 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
ASTM A 688 / SA 688 For Welded feed water heater ‘U’ Tubes
ASTM A731 / A731M Seamless and Welded Ferritic and Martensitic Stainless Steel Pipe
ASTM A 778 Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
ASTM A789/A789M, ASME SA789/SA789M Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
ASTM A790/A790M, ASME SA790/SA790M Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
ASTM A 450/A 450M Specificaion for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
ASTM A530/A530M Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
ASTM A 999/A 999M Specification for General Requirements for alloy and Stainles Steel Pipe
ASTM A813/A813M Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
ASTM A814/A814M Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
ASTM A999/A999M Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
ASTM A1016/A1016M Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
German-Standards
DIN 2463-1Welded austenitic stainless steel tubes: dimensions and masses per unit length
DIN 17455 Welded circular stainless steel tubes with general quality requirements -Technical delivery conditions
DIN 17457 Welded circular austenitic stainless steel tubes subject to special requirements
EN Standards
EN 10216-5 Welded Stainless Steel Tube
EN 10217-7 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
EN 10296-2 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
Australian Standards
AS 1528 Tubes (Stainless Steel) and Tube Fittings for the Food Industry.
JIS-Standards
JIS G 3447 Stainless Steel Sanitary Pipes
G 3448 Light Gauge Stainless Steel Tubes for Ordinary Piping
G 3459 Stainless Steel Pipes
G 3468 Large Diameter Welded Stainless Steel Pipes
G 3463 Stainless Steel Boiler and Heat Exchanger Tubes
G 3446 Stainless Steel Pipes for Machine and Structural Purposes