Finned Tube----Copper Fin Tubes & Copper Alloy Fin Tubes
We additionally manufacture Fin Tubes that features copper fin tube and copper alloy fin tube, these compared to plain tubes will increase the extent of the tube and improves the warmth transfer potency. we've got the ability & necessary knowhow for the assembly of integrated fin tubes & will manufacture an equivalent as per your needs.
Met - Gem penalised Tubes
Met - Gem kind one.
a) S/T is kind of integral extended surface tubes having spiraling fins (19,26,40 on the surface & designed primarily for Shell & Tube device application, to extend potency & cut back value.
b) Duplex kind S/T Trufin: this can be out there in an exceedingly type of mixtures like (Copper finned tube over a steel liner, Admiralty finned tube over cupro-nickel liner, Al finned tube over an Admiralty liner etc.
Met - Gem kind a pair of
a) S/T Turbo-Chill : Is an integral extended surface tube having spiraling fins (19,26,40) on the surface & integral spiraling ridges on the within to boost turbulation, so giving additional balance outside to within constant quantitative relation & designed for shell & tube device application like boiling & compression of hydrocarbons.
Met - Gem kind three
a) H/F Trufin : Is AN integral extended surface tube having spiraling fins on the surface & designed primarily for application, that need a high outside to within extent quantitative relation like heating or cooling gases.
Met - Gem kind four
a) L/C Turfin : could be a bimetallic extended surface tube with high integral fins, for lightweight finned on prime surface or liner tubes chosen for resistance to a particular corrosion surroundings. it's a high outside to within extent quantitative relation for heating or cooling gases. L/C Turfin is out there in any mixtures & in four sorts spirally wounded fin tubes : 1) Plain kind, 2) Crimped kind, 3) 'L' kind, 4) Wire wounded
Finned Tubes -Intergroove Integrally Finned Tubes
No. of begins Triple start
No. of fins/ in. nineteen & twenty six
Type of fin Low & high
Placement of fins OD or ID or OD ID
Dia 19.05mm & 15.77mm
Wall 16SWG, 17SWG, 17.5SWG & 18SWG
Length half-dozen MTRS
Key Words: Finned Tube, Fin Tubes, Extruded Fin Tubes, Copper Nickel Tube, L Fin tube, Tubos Aletados